Needle Plate
Fill in the fields below and the team will give you a quote for a needle plate repair or service






FAQ's

The needle plate on my sewing machine has several burrs. Can the team help?

The professionals carry out needle plate repairs for Coventry resulting from broken needle damage.

They will use top end tools and techniques to repair the needle plate where possible, otherwise they will source an equivalent needle plate.

I am experiencing tension problems with my sewing machine but the needle plate is not broken?

Tension problems are a common problem with sewing machines created by sewing fabric which is too thick for the machine or when fluff has been caught in the discs.

Since modern sewing machines are computerised, these can present noticeable headaches for any sewing machine owner.

Fortunately the staff offer an excellent sewing machine service for Coventry in additional to needle plate repairs and replacements.

What is the typical turnaround time for needle plate repair West Midlands?

If no spares are necessary for a needle plate repair for Coventry, then the expected turnaround time is about 5 working days.

The technicians source appropriate from UK suppliers. For obsolete sewing machine models, parts will need to be sourced from USA suppliers.

How much will it cost to replace a faulty needle plate?

It depends upon the manufacturer of sewing machine or overlocker but in the vast majority of cases it is much cheaper to get a needle plate replacement for Coventry than buying a refurbished sewing machine.

Estimates needle plate replacement Coventry is provided upon your initial enquiry with the professionals.

Needle Plate Repairs Coventry

Needle plate repair Coventry West Midlands from the professionals is economical and prompt.

When you're finding sewing problem issues, the issue might be a faulty needle plate.

The team providing sewing machine repairs always aim to be courteous and helpful - just check out the recent testimonials on the right from clients all throughout the country.

For additional information needle plate repairs Coventry or for a free quote, just contact the professionals today.

You can do this by completing the online form provided.

Please note that cheap sewing machines from catalogues and supermarkets are not cost-effective to repair due to the poor quality parts and workmanship used in these machines. The technicians do not sell spare parts by themselves.

Needle plate repair Coventry

Needle Plate Replacement Coventry

The needle plate (also known as a throat plate) is a vital element of your sewing machine or overlocker.

A needle plate sets the pressure and ensures that fabric is fed properly. The team have access to a range of needle plates fit for different sewing activities including feed cover needle plates, straight stitch needle plates and zig zag needle plates.

The technicians provide needle plate replacements for Coventry in West Midlands covering all the major sewing machine including:

• Bernina needle plates
• Brother needle plates
• Pffaf needle plates
• Singer needle plates
• Wimsew needle plates
• Janome needle plates
• Husqvarna Viking

These are just a few of the common sewing machine brands with needle plate problems which the professionals have efficiently serviced.

A common problem that requires a needle plate repair is when needle thread keeps on breaking. This is often related to a damaged needle plate or timing faults.

Alternatively you might get a sewing machine needle stuck inside the needle plate. The sewing machine repairers have the necessary knowledge to carry out this repair service in an efficient manner.

Depending upon the make of machine, the bobbin bases might need replacing if they start fraying the thread as well.

The technicians provides needle plate repairs for Coventry via a convenient collection and delivery service from UK mainland addresses.

To organise a needle plate repair for Coventry covering your sewing machine or overlocker, simply fill in the enquiry form with your contact details and a short description of the service needed. You will receive a prompt response by email or phone during business hours.

Recent Enquires

elna lotus tspelectricity not connecting to machine or footplate. I have tested the plug which works with other gadget.i live in up somborne and could bring the machine to you in winchester

Mrs.

first the tension was acting up stitches becoming loose then it kept jamming ,the fabric is being pulled into the plate by the feed dogs.i have tried changing the bobbin and needle blow out any fluff under the plate but nothing works to fix it

Samantha

buttericktension needs adjustedthread feeder keeps catching and breaking thread.plate needs replacinggeneral service

Corinna

since thread caught in plate it will not pick up needle threat to sew.

Carole

brand is medion.the machine sounds quite load and when the needle goes through plate it is catching the mechanism under the plate and bending the needles

Sandra

singer 66 hand operated working perfect until I watched a youtube on cleaning - big mistake undid a couple of screws under the needle plate. I live in shepperton.

Vanessa

brother-fs13oqc.i`ve had for about 5 years and never been serviced.yesterday it can up with e6, suggesting thread is tangled.i can not get the needle plate off to investigate or turn the handwheel so now machine is completely locked up.please help!!thanks janet

Janet

toyota, model x series.foot feed plate ! think that€™s what it€™s called needs replacing

Diane

bernina machine. needle jammed in metal plate.

Maureen

needle is coming down on plate

Thelma

teeth feed dogs on sewing plate do not move up and down so fabric can not pass through easily. drop feed lever at front of machine no longer attached to teeth

Nicole

i have lost a screw that holds the metal plate in place over the top loading bobbin on my singer 8500q modern quilter machine. needle broke and the bobbin case had got caught and was clunking so had to take it out. without even moving away from the machine managed to lose one of the screws from the plate!just wondered if I can order the screw from you or if not if you know where I can get one?thanks in advance for any help you can give.

Sara