Needle Plate
Fill in the fields below and the team will give you a quote for a needle plate repair or service






FAQ's

The needle plate on my sewing machine has several burrs. Can the team help?

The professionals carry out needle plate repairs for Llanfair Mathafarn Eithaf resulting from broken needle damage.

They will use specialist tools and techniques to repair the needle plate where possible, otherwise they will source a high grade needle plate.

I am experiencing tension problems with my sewing machine but the needle plate is not broken?

Tension problems are a common issue with sewing machines created by sewing fabric which is too thick for the machine or when fluff has been caught in the discs.

Since modern sewing machines are computerised, these can present irritating headaches for any sewing machine owner.

Fortunately the staff offer an excellent sewing machine service for Llanfair Mathafarn Eithaf in additional to needle plate repairs and replacements.

What is the typical turnaround time for needle plate repair Anglesey?

If no spares are needed for a needle plate repair for Llanfair Mathafarn Eithaf, then the standard turnaround time is about 5 business days.

The technicians source high grade from UK suppliers. For obsolete sewing machine models, parts will need to be sourced from USA suppliers.

How much will it cost to repair a broken needle plate?

It varies upon the brand of sewing machine or overlocker but in most cases it is much more affordable to get a needle plate replacement for Llanfair Mathafarn Eithaf than purchasing a replacement sewing machine.

Quotes needle plate replacement Llanfair Mathafarn Eithaf is provided upon your initial enquiry with the staff.

Needle Plate Repairs Llanfair Mathafarn Eithaf

Needle plate repair Llanfair Mathafarn Eithaf Anglesey from the professionals is cost-effective and quick.

When you're having sewing problem problems, the issue might be a broken needle plate.

The team undertaking sewing machine services always aim to be friendly and informative - just check out the recent testimonials on the right from customers all across the country.

For further information needle plate repairs Llanfair Mathafarn Eithaf or for a free quote, just get in touch with the specialists today.

You can achieve this by enquiring with the website form provided.

Please note that cheap sewing machines from catalogues and supermarkets are not cost-effective to repair due to the inferior parts and workmanship used in these machines. The staff do not sell spare parts by themselves.

Needle plate repair Llanfair Mathafarn Eithaf

Needle Plate Replacement Llanfair Mathafarn Eithaf

The needle plate (also known as a throat plate) is a crucial element of your sewing machine or overlocker.

A needle plate sets the pressure and ensures that fabric is fed properly. The team can obtain a range of needle plates fit for different jobs including feed cover needle plates, straight stitch needle plates and zig zag needle plates.

The technicians undertaken needle plate repairs for Llanfair Mathafarn Eithaf in Anglesey covering all the main sewing machine including:

• Bernina needle plate
• Brother needle plate
• Pffaf needle plate
• Singer needle plate
• Wimsew needle plate
• Janome needle plate
• Husqvarna Viking

These are just some of the common sewing machine brands with needle plate faults which the professionals have effectively repaired.

A common fault that requires a needle plate repair is when needle thread keeps on breaking. This is often related to a damaged needle plate or timing problems.

Alternatively you might get a sewing machine needle jammed inside the needle plate. The sewing machine repairers have the required knowledge to carry out this repair service in a professional manner.

Depending upon the model of machine, the bobbin bases might need a replacement if they start fraying the thread as well.

The technicians undertakes needle plate repair services for Llanfair Mathafarn Eithaf via a hassle-free pickup and delivery service from UK mainland addresses.

To request a needle plate repair for Llanfair Mathafarn Eithaf covering your sewing machine or overlocker, simply fill in the website form with your contact information and a short description of the service required. You will get a quick response by email or phone during working hours.

Recent Enquires

presser foot plate will not lift up. lever not working.

Julie

i have a viking husqvarna cl19 purchased in x it is not picking up the thread from the bobbin, I have taken the cover plate off and removed any fluff, and oiled any relevant parts, including the bobbin screw.

Margaret

melodie x singerneedle hits plate needs new needles

E

hi I hope you can help.i have a hand cranked sewing machine which I have kindly been given but I can find very little information about. all I know is that it was purchased second hand in the early 1960s I have been told. it is extremely heavy and is pale green in colour and has the words h o m e across the machine and a manufacturing plate which I believe may say george dee limited it is in reasonable good condition I think but it has been stored for the past 50 plus years and not used since about x so is a little marked in places.the machine seems to be working ok apart from the tension also the tension knob has come off which luckily I still have .do you think that this machine is something you could possible repair etcif so please can I have an idea of the cost.i live in lincoln.please can you let me know where you are basedi look forward to hearing from you.kind regardslisa dexter

Lisa

hi there, I was hoping you could help me identify the issue with my sewing machine and help me to fix it! long story short, I was an idiot and forgot about a pin hidden in some fabric, and proceeded to run it over with the needle- since then the machine has made a horrendous clunking sound and refused to sew- i`ve tried replacing the needle thinking it was bent, no change- it feels like the needle is catching in the metal plate where the bobbin thread would normally be pulled up? any insight would be really helpful! thanks

Jake

janome sewing machine needing service.also repair as needle is jamming in plate and not going down properly. please coud you give me an approximate estimate? and can I bring it in at any time?thanks,michal

Michal

i have an aeg x and one of the chaining pins has snapped in the needle plate. thanks

Samantha

brother, about 20 years old. needle goes up and down but doesn`t stitch, may be the feeder plate.

Margaret

bernina activa x thread is looping at the bottom after the needle fell out when trying to stitch a piece of material that was too thick. cleaning of the bobbin, stitch plate and following the trouble shooting instructions in the manual has not made any difference.

Verena

thread keeps catching and bunching up on the needle pins on plate, brother industrial overlocker, have replaced plate still happening...

Adam

hello,i have my mum`s old singer x machine, which is likely around 40 years old. i`m looking to get it serviced/repaired as the metal plate under the bobbin isn`t turning on its own to allow the bobbin thread to be picked up, although it can still move. my mum lives in edington and would be happy to drop off/collect from warminster. would you be able to advise if this is something you could do and what sort of costs we might be looking at?many thanks,hannah

Hannah

the needle shaft seems to be hitting the needle plate

Marie-Anne