Needle Plate
Fill in the fields below and the team will give you a quote for a needle plate repair or service






FAQ's

The needle plate on my sewing machine has a large burr. Can the staff help?

The experts provide Wrexham needle plate repairs resulting from broken needle damage.

They will use professional tools and techniques to repair the needle plate where possible, otherwise they will source a high quality needle plate.

I am having tension problems with my sewing machine but the needle plate is not damaged?

Tension problems are a common fault with sewing machines caused by sewing fabric which is too thick for the machine or when fluff has been caught in the discs.

Since the latest sewing machines are computerised, these can present significant headaches for any sewing machine owner.

Fortunately the staff undertake an excellent sewing machine service for Wrexham in additional to needle plate repairs and replacements.

What is the normal turnaround time for needle plate repair Wrexham?

If no spares are required for a needle plate repair for Wrexham, then the standard turnaround time is about 5 business days.

The technicians source high quality from UK suppliers. For rarer sewing machine models, parts will need to be sourced from USA suppliers.

How much will it cost to repair a damaged needle plate?

It varies upon the brand of sewing machine or overlocker but in most cases it is much more economical to get a needle plate repair for Wrexham than buying a replacement sewing machine.

Quotes needle plate repair Wrexham is provided upon your initial enquiry with the technicians.

Needle Plate Repairs Wrexham

Needle plate repair Wrexham Denbighshire from the professionals is cost-effective and quick.

When you're having sewing problem problems, the issue might be a broken needle plate.

The team undertaking sewing machine services always aim to be friendly and informative - just check out the recent testimonials on the right from customers all across the country.

For further information needle plate repairs Wrexham or for a free quote, just get in touch with the specialists today.

You can achieve this by enquiring with the website form provided.

Please note that cheap sewing machines from catalogues and supermarkets are not cost-effective to repair due to the inferior parts and workmanship used in these machines. The staff do not sell spare parts by themselves.

Needle plate repair Wrexham

Needle Plate Replacement Wrexham

The needle plate (also known as a throat plate) is a crucial element of your sewing machine or overlocker.

A needle plate sets the pressure and ensures that fabric is fed properly. The team can obtain a range of needle plates fit for different jobs including feed cover needle plates, straight stitch needle plates and zig zag needle plates.

The technicians undertaken needle plate repairs for Wrexham in Denbighshire covering all the main sewing machine including:

• Bernina needle plate
• Brother needle plate
• Pffaf needle plate
• Singer needle plate
• Wimsew needle plate
• Janome needle plate
• Husqvarna Viking

These are just some of the common sewing machine brands with needle plate faults which the professionals have effectively repaired.

A common fault that requires a needle plate repair is when needle thread keeps on breaking. This is often related to a damaged needle plate or timing problems.

Alternatively you might get a sewing machine needle jammed inside the needle plate. The sewing machine repairers have the required knowledge to carry out this repair service in a professional manner.

Depending upon the model of machine, the bobbin bases might need a replacement if they start fraying the thread as well.

The technicians undertakes needle plate repair services for Wrexham via a hassle-free pickup and delivery service from UK mainland addresses.

To request a needle plate repair for Wrexham covering your sewing machine or overlocker, simply fill in the website form with your contact information and a short description of the service required. You will get a quick response by email or phone during working hours.

Recent Enquires

janomei altered the pressure dial to sew a fine scarf but now it wont see heavy cotton.ive cleaned under the footplate and around the bobbin but it still doesnt stitch.

Carole

britherneedle hitting the base plate / needle out of alignment/timing out of sinc

Fiona

bobbin case stuck. was loose. plastic footplate rises when bobbin is out of place.

Gillian

hi.i have the black singer x as pictured above. I am finding it hard to use as the sewing plate bobbin holder and plastic shild is not sitting correctly. otherwise machine is in fine working order. please could you help by either repairing or spare parts ordered for me. regards dee

Dee

aldi / sewcrafty model md15694needle hitting bookplate. many thanks, vicky

Vicky

making a screeching noise with no difference after cleaning and oiling needle plate and hook area.

Jean

bernina activa x thread is looping at the bottom after the needle fell out when trying to stitch a piece of material that was too thick. cleaning of the bobbin, stitch plate and following the trouble shooting instructions in the manual has not made any difference.

Verena

buttericktension needs adjustedthread feeder keeps catching and breaking thread.plate needs replacinggeneral service

Corinna

needle hiting plate

Elenor

silver viscount 1050service and needle threader sortedplease plus plate covering bobbin

Mrs

good afternoonfrister rossmann machinei have a frister rossmann sewing machine model beaver 9 electronic which I purchased in x €“ it has been working fine up until last week when the needle broke and the needle insert plate is now bent and badly burred on the central slot where the needle goes through the plate insert. I have a couple of photographs (back and front side) which I can send you if you let me have your email address which hopefully shows the damage. as the needle plate insert will not now sit flat on top of the feed dog area, I am unable to use the machine.i have tried to obtain a replacement needle plate insert but have not been successful to date. is this something that you could repair or let me know where I can obtain a replacement part. the couple of websites I tried seem to provide every part except this one!my machine probably needs a service also €“ so could you please let me know how much a service would cost if you service machines?i live in heathfield so would be able to bring the machine down to hastings quite easily.many thankslucie elphick

Lucie

i have a janome 525s model x which has started to gather a lot of thread within the first few stitches and then stops completely. when I move the fabric, the thread is completely knotted underneath and has to be unpicked from under the footplate. I have taken the footplate off and cleaned but it still jams.

Amy