Tension Control
Fill in the fields below and the team will give you a quote for a sewing machine tension repair or service






FAQ's

How long will it take to rectify a tension problem with my sewing machine?

If no spare parts are required for a sewing machine tension repair will be a week in most cases.

Parts for older models shall be acquired from UK or USA suppliers which can result in a longer turnaround time.

Are tension problems with sewing machines and overlockers cost-effective to repair?

Yes in the vast majority of cases a tension problem with your sewing machine or overlocker can be repaired at an affordable cost.

Request quotes for sewing machine tension repair Cwm Cadnant by filling in the online form.

My sewing machine has a tension problem. What could the issue be?

This is a frequently requested repair issue for sewing machines which is often the result of someone trying to sew fabric too thick for the machine or they have changed their thread and fluff has become caught in the tension discs.

If you are certain that the tension unit is broken, then it is highly advised that a new check spring be used as this what has actually broken.

Get more information in regards to sewing machine tension repair Cwm Cadnant with the online form.

I need advice on adjusting the tension of my overlocker?

The technicians would advise customers to check the manufacturer's manual or website for general troubleshooting.

The professional sewing machine tension repair service for Cwm Cadnant is intended for customers who have damaged tension units or who want servicing of their machine as well.

Sewing Machine Tension Repairs Cwm Cadnant

Professional sewing machine tension repairs for Cwm Cadnant Anglesey at fully equipped repair centres with access to the best parts and tools needed for a long lasting and reliable repair.

The technicians have the experience to repair premium sewing machine machines and overlockers to a functioning condition again.

They always take a thorough and professional approach to resolving tension problems on sewing machines form domestic and commercial customers in Anglesey.

Most tension problems with your sewing machine can be repaired at a low cost so why wait any longer?

To arrange a sewing machine tension repair for Cwm Cadnant, just enquire with the website form shown on this website.

Please be aware that budget sewing machine brands found in supermarkets and catalogues such as Argos, Aldi, Lidl, Ikea and E&R are not cost-effective to repair due to the low quality parts used.

Sewing machine tension repair Cwm Cadnant

Sewing Machine Tension Replacement Cwm Cadnant

Many sewing machines come fitted with a tension control dial that is used to control the tension of the upper thread.

When tension is correctly set, the top thread and bobbin thread will produce uniformed stitches. When the tension is too tight, the switch will begin to pucker and break.

If your sewing machine tension is too loose, the stitches will also be very loose.

Common issues associated with sewing machine tension problems include:

• Skipped stitches
• Thread too tight
• Thread too loose
• Tension unit broken

It should be noted that unless your tension unit is actually broken, a tension problem can often result from other factors not associated with tension problems such as bent or dull needle, poor quality thread and lint or thread caught in bobbin tension discs.

Tension repair Cwm Cadnant for sewing machines and overlockers covers all the major brands including Elna, Husqvarna Viking, Pfaff, Brother, Singer to name but a few examples.

The team are proud of their excellent customer service and responses to customer enquiries about sewing machine repair services.

Just check out some of the recent testimonials on the right from customers throughout the UK mainland who have used the sewing machine service from the helpful and friendly technicians.

The vast majority of sewing machine tension repairs are provided by a collection and delivery service which can be arranged at a convenient time from your home or workplace in Anglesey.

For more information regarding sewing machine tension repair Cwm Cadnant just fill in the website form displayed on this website and you will receive a response by email or phone shortly.

Recent Enquires

tension ,slip stitching, stick size

Whinham

janome 4400machine is not picking up the stitches from the bobbin. tried changing needle and the tension but can`t get it to work. machine hasn`t been used in a while.are you still able to service machines during covid 19? was hoping to pass my furlough time with it.

Verity

jones approximately 20-30 years old tension problems and general maintenance/service needed

Sally

i have a brother innovis 700e and it needs a new rubber wheel on the bobbin wonder, top tensioner needs adjusting or some tlc, and needle threader is temperamental. if you could give me a price to sort these, or if you have a fixed price service /repair that would be good. thanks

Garry

quote for service needed for brother innovis1250 the upper thread tension is not as good as used to be

Dawn

hi I have 2 sewing machines, neither of which have been used for a few years. they do work (but the tensioning is wrong) and I feel could generally do with a service. one is a brother - the model seems to be vx1060/vx1080/vx1090/vx2010 the other is a `fantasy`. please could you give me a quote for servicing? kind regards debs

Deb

lower cotton keeps breaking and machine noisy tried different needles different tension goes for a short distance then breaks

margaret

riccarmay machines needs to be fully serviced. it has stopped sewing plain straight stitch and the tension does not seem to be accurate.

Susan

possibly tension problem. sewing looks fine on the top but is loose and loops form on the underside. have tried cleaning it which helped for a while but has started the same problem again.

Julie

hi, I have borrowed a brother 1034d from a friend, but it has multiple issues I think...as your faq suggests, it`s very noisy, the yellow thread gets dropped frequently, and occasionally the whole bundle too... i`ve re threaded it multiple times, and cleaned the tension plates, but it`s still not a happy bunny, i`m hoping someone will be able to have a look. I live in llanberis but I borrowed it from a friend in ruthin.diolch yn fawr.

polly

i have a toyota x purchased 30 years ago from debenhams. the stitching is bunching at the bottom. I have tried altering the tension but can`t get it right. it probably needs a service too. do you service toyota and what sort of price would it be?please reply via email. thank you.

Susan

my machine is a janome memory craft 9900there is something not quite right with the tension top thread and bobbin thread especially when using embroidery mode.i have been experiencing bird nesting under the needle plateplease advise how much a service would cost where would I have to stop the machine off and how much

Debbie