Tension Control
Fill in the fields below and the team will give you a quote for a sewing machine tension repair or service






FAQ's

How long will it take to fix a tension issue with my sewing machine?

If no spare parts are required for a sewing machine tension recalibration will be a week in most cases.

Parts for older models shall be acquired from UK or USA suppliers which can result in a longer turnaround time.

Are tension problems with sewing machines and overlockers cost-effective to repair?

Yes in the vast majority of cases a tension problem with your sewing machine or overlocker can be repaired at an affordable cost.

Request estimates for sewing machine tension repair Llaneugrad by filling in the online form.

My sewing machine has a tension problem. What could the issue be?

This is a frequently requested repair issue for sewing machines which is often the result of someone trying to sew fabric too thick for the machine or they have changed their thread and fluff has become caught in the tension discs.

If you are certain that the tension unit is broken, then it is highly advised that a new check spring be used as this what has actually broken.

Get more information in regards to sewing machine tension repair Llaneugrad with the enquiry form.

I need advice on adjusting the tension of my overlocker?

The technicians would advise customers to check the manufacturer's manual or website for general troubleshooting.

The professional sewing machine tension repair service for Llaneugrad is intended for customers who have damaged tension units or who need servicing of their machine as well.

Sewing Machine Tension Repairs Llaneugrad

Professional sewing machine tension repairs for Llaneugrad Anglesey at fully equipped repair centres with access to the best parts and tools needed for a long lasting and reliable repair.

The technicians have the experience to repair premium sewing machine machines and overlockers to a functioning condition again.

They always take a thorough and professional approach to resolving tension problems on sewing machines form domestic and commercial customers in Anglesey.

Most tension problems with your sewing machine can be repaired at a low cost so why wait any longer?

To arrange a sewing machine tension repair for Llaneugrad, just enquire with the website form shown on this website.

Please be aware that budget sewing machine brands found in supermarkets and catalogues such as Argos, Aldi, Lidl, Ikea and E&R are not cost-effective to repair due to the low quality parts used.

Sewing machine tension repair Llaneugrad

Sewing Machine Tension Replacement Llaneugrad

Many sewing machines come fitted with a tension control dial that is used to control the tension of the upper thread.

When tension is correctly set, the top thread and bobbin thread will produce uniformed stitches. When the tension is too tight, the switch will begin to pucker and break.

If your sewing machine tension is too loose, the stitches will also be very loose.

Common issues associated with sewing machine tension problems include:

• Skipped stitches
• Thread too tight
• Thread too loose
• Tension unit broken

It should be noted that unless your tension unit is actually broken, a tension problem can often result from other factors not associated with tension problems such as bent or dull needle, poor quality thread and lint or thread caught in bobbin tension discs.

Tension repair Llaneugrad for sewing machines and overlockers covers all the major brands including Elna, Husqvarna Viking, Pfaff, Brother, Singer to name but a few examples.

The team are proud of their excellent customer service and responses to customer enquiries about sewing machine repair services.

Just check out some of the recent testimonials on the right from customers throughout the UK mainland who have used the sewing machine service from the helpful and friendly technicians.

The vast majority of sewing machine tension repairs are provided by a collection and delivery service which can be arranged at a convenient time from your home or workplace in Anglesey.

For more information regarding sewing machine tension repair Llaneugrad just fill in the website form displayed on this website and you will receive a response by email or phone shortly.

Recent Enquires

singer tradition, think it needs servicing as it keeps jamming. perhaps the tension needs a tweak.

Nicola

i have a brother xl x sewing machine I would like it to be serviced and a new wire tension (on the top of the machine after thread leaves the cotton bobbin) fitted as well quote please

David

old brother machine with tension issues I can`t seem to resolve. stitching bunching up under the foot. I think it just needs a good clean and service as its been a while since I have looked at it. please advise your prices for servicing?

Lucy

singer 14sh754tension not correct. lh thread loose putting others out of kilter.

Della

i have an elna 614de overlocker, which i`ve had about three years second hand. it worked at first brilliantly but then stopped cutting properly and tension kept going. I haven`t used quite a while and ideally would like to service it (depending on cost of course) rather than buy new one. this is the first overlocker i`ve had and no idea how much this would have been in the first place. look forward to hearing from you. fiona burrows

Fiona

toyota 9400i am sewing a cushion cover in upholstery fabric. I can sew through several layers happily then the machine either bends or breaks the needle. it unthreaded at times too, i`ve tried several needles/tensions etc but cannot find a solution, ran out of needles now too!many thanks

Denise

problems with top and bottom tension top tension is too tight and bobbin tension is too loose.

Laura

problem with tension. looping underneath fabric. tried changing tension but makes no difference. can I have a quote please and how long will it take as I need it asap. many thanks.

Lyn

i have a singer sewing machine model 401g which I acquired from my mom, not been used very much in 6/7year to my knowledge it`s never been serviced.i have started to use it but the stitching and tension is not right. please can you help.

Lesley

given machine tension is not right and I think it would also benefit from a service.

Felicity

its only been used for tiny little jobs over the last years and not done a major job. I have neglected it and now I expect it to perform well. seriously it is stitching but badly. all the tensions are wrong. im sure the machine it still ok although it is old and probably needs to be serviced and adjusted. if it is not worth sorting out I hope you would tell me before I spend money on it.

Pat

also stitch problems maybe due to tension spool holder has broken off maybe not repairable ive tried superglue etc. no good. I bought machine 22yrs ago and never had trouble before. hope you can help.pls quote a price.

Wendy